SPLICE MATERIAL

Universal Splice Materials are specially designed and formulated to yield maximum bond and adhesion to all compounds and belt carcasses, including NR, SBR, BR, IR, CIIR, NBR and blend’s of polymers such as NR/SBR. Factory constructed from the same rubber stocks as our belt lines, Splice Kits are manufactured and stocked under strict laboratory control, dated, and kept under “cool room” temperatures to ensure near or greater adhesions than original belt produced from our factories.
ACE
ADVANTAGES. . .

HIGH INITIAL
BONDING STRENGTH!

INCREASED SHELF LIFE
FOR ALL SPLICING MATERIALS!

INCREASED WORKING TACT OFFERS
ADDITIONAL SAFETY DURING ASSEMBLY!

EASIER & FASTER APPLICATION SAVES
VALUABLE TIME & LABOR COSTS!
COMMON COMMERCIAL ASTM ELASTOMER DESIGNATIONS:
NR-Natural Rubber, SBR-Styrene-Butadiene Rubber, BR-Polybutadiene Rubber,
IR-Synthetic Polyisoprene, CIIR-Chlorobutyl Rubber, NBR-Nitrile Elastomers

*For complete cross-reference and compatibility, refer to backside chart, or contact Technical Support for Job Matched Performance:

1•800•633•1470

Splice Kits are individually prepared at time of order and “Factory Built” to ensure both freshness and expediency with your order. Appropriate cover stocks and gums are matched along with correct cements in our Universal series: Universal Vulcanizing Cement (UVC) SBR Based & Universal Vulcanizing Cement Special (UVC-S) for compounds containing NBR. Each kit also contains the appropriate solvent & includes a special fabric primer which is designed to re-activate former textile coats and dips when the carcass is over buffed from stripping or old from age.
SPLICE MATERIAL SELECTION CHART
Main Belt Lines
Compounds
Cover/Tie Gum
Cement
Solvent
HyFlex
RMA GRD I
RMA GRD II
GRD II BeltMaster
PRC GRD II
MOR Woodchip
MSHA/Abrasion
MSHA/Underground
MSHA/Nitrile
MSHA/Climatic
300º F. Hi-Temp.
350º F. Hot Asphalt
400º F. Hot Material
Polar Bear – 80º F.
Waste Treatment
Alumina
# 29
# 21
# 22
# 93
# 95
# 24
# 32
# 33
# 35
# 36
# 23
# 61
# 16
# 31
# 37
# 38

SBR
SBR
SBR
SBR
SBR
SBR/NBR
SBR Based
SBR Based
SBR/NBR
SBR Based
SBR Based
NBR
CIIR/SBR
SBE Blend
SBE Blend
SBE Blend

UVC
UVC
UVC
UVC
UVC
UVC-S
UVC
UVC
UVC-S
UVC
UVC
UVC-S
UVC
UVC
UVC
UVC
Toluol
Toluol
Toluol
Toluol
Toluol
Xylene
Toluol
Toluol
Xylene
Toluol
Toluol
Xylene
Toluol
Toluol
Toluol
Toluol

Universal Splice Kits; cements, calendered cover stocks, primers, solvents, & tie gums, have a dated shelf-life of at least six months. However, if refrigerated (preferably < 50 deg. F. ), then useful life can be extended up to twelve months. Store these materials in a cool, dark place and always out of direct sunlight/ozone, high humidity, and other forms of radiant energy sources.

  Home    Service/Capabilities    Products    Technical Data   
  Custom Equipment    News/Specials  Sales Reps